Markup Validation Service

Validation Output: 15 Errors

1. Line 10, Column 190: cannot generate system identifier for general entity "B".

   �e,perigord,France,holiday,vacation,B&B,Bed and Breakfast,chambre d'hote,ancie

   ?

   An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".

   Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.

   If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.

   Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.

2. Line 10, Column 190: general entity "B" not defined and no default entity.

   �e,perigord,France,holiday,vacation,B&B,Bed and Breakfast,chambre d'hote,ancie

   ?

   This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.

3. Line 10, Column 191: reference to entity "B" for which no system identifier could be generated.

   �,perigord,France,holiday,vacation,B&B,Bed and Breakfast,chambre d'hote,ancien

   ?

   This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.

4. Line 10, Column 189: entity was defined here.

   �ne,perigord,France,holiday,vacation,B&B,Bed and Breakfast,chambre d'hote,anci

5. Line 54, Column 96: required attribute "ALT" not specified.

   �src="za1.png" width="337" height="30"></p></td>

   ?

   The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.

   Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>.

6. Line 100, Column 97: required attribute "ALT" not specified.

   �="zzwd1.jpg" width="900" height="280"></td>

   ?

   The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.

   Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>.

7. Line 116, Column 63: NET-enabling start-tag requires SHORTTAG YES.

   �   <param name="allowScriptAccess" value="sameDomain" />

   ?

   The sequence <FOO /> can be interpreted in at least two different ways, depending on the DOCTYPE of the document. For HTML 4.01 Strict, the '/' terminates the tag <FOO (with an implied '>'). However, since many browsers don't interpret it this way, even in the presence of an HTML 4.01 Strict DOCTYPE, it is best to avoid it completely in pure HTML documents and reserve its use solely for those written in XHTML.

8. Line 117, Column 67: NET-enabling start-tag requires SHORTTAG YES.

   �m name="movie" value="wd.swf?xml_path=slides.xml" />

   ?

   The sequence <FOO /> can be interpreted in at least two different ways, depending on the DOCTYPE of the document. For HTML 4.01 Strict, the '/' terminates the tag <FOO (with an implied '>'). However, since many browsers don't interpret it this way, even in the presence of an HTML 4.01 Strict DOCTYPE, it is best to avoid it completely in pure HTML documents and reserve its use solely for those written in XHTML.

9. Line 118, Column 47: NET-enabling start-tag requires SHORTTAG YES.

               <param name="quality" value="high" />

   ?

   The sequence <FOO /> can be interpreted in at least two different ways, depending on the DOCTYPE of the document. For HTML 4.01 Strict, the '/' terminates the tag <FOO (with an implied '>'). However, since many browsers don't interpret it this way, even in the presence of an HTML 4.01 Strict DOCTYPE, it is best to avoid it completely in pure HTML documents and reserve its use solely for those written in XHTML.

10. Line 119, Column 23: there is no attribute "SRC".

                <embed src="wd.swf?xml_path=slides.xml" quality="high" width="300" h

    ?

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

11. Line 119, Column 60: there is no attribute "QUALITY".

    �"wd.swf?xml_path=slides.xml" quality="high" width="300" height="230" name="te

    ?

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

12. Line 119, Column 73: there is no attribute "WIDTH".

    �ath=slides.xml" quality="high" width="300" height="230" name="tech" align="mi

    ?

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

13. Line 119, Column 86: there is no attribute "HEIGHT".

    �l" quality="high" width="300" height="230" name="tech" align="middle" allowSc

    ?

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

14. Line 119, Column 97: there is no attribute "NAME".

    �"high" width="300" height="230" name="tech" align="middle" allowScriptAccess=

    ?

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

15. Line 119, Column 110: there is no attribute "ALIGN".

    �"300" height="230" name="tech" align="middle" allowScriptAccess="sameDomain" 

    ?

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

16. Line 119, Column 137: there is no attribute "ALLOWSCRIPTACCESS".

    �ch" align="middle" allowScriptAccess="sameDomain" type="application/x-shockwa

    ?

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

17. Line 119, Column 155: there is no attribute "TYPE".

    � allowScriptAccess="sameDomain" type="application/x-shockwave-flash" pluginsp

    ?

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

18. Line 119, Column 199: there is no attribute "PLUGINSPAGE".

    �ation/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashpl

    ?

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

19. Line 119, Column 245: NET-enabling start-tag requires SHORTTAG YES.

    �ww.macromedia.com/go/getflashplayer" />          

    ?

    The sequence <FOO /> can be interpreted in at least two different ways, depending on the DOCTYPE of the document. For HTML 4.01 Strict, the '/' terminates the tag <FOO (with an implied '>'). However, since many browsers don't interpret it this way, even in the presence of an HTML 4.01 Strict DOCTYPE, it is best to avoid it completely in pure HTML documents and reserve its use solely for those written in XHTML.

20. Line 119, Column 245: element "EMBED" undefined.

    �ww.macromedia.com/go/getflashplayer" />          

    ?

    You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:

    • incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "<frameset>" element),
    • by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead).
    • by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
21. Line 130, Column 82: required attribute "ALT" not specified.

    �" width="43" height="55" align="left"> <br>

    ?

    The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.

    Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>.

? Top